Technical Data for imaWorx CXP-12 Quad

imaWorx CXP-12 Quad

Host Interface PCIe Gen 3 x8 (Direct Memory Access)
Bandwidth (theor.) 7 876 MB/s
Bandwidth (typ./max.) 6 520 MB/s
On-board memory 1.5 GB DDR4-RAM
Voltage / Current
PCIe Slot 12 V (+-5%) <1.5 A
(actual values depend on processing)


PCIe 6-pin connector 12 V (+-5%) <6.5 A
(actual values depend on connected PoCXP cameras)

PCIe Standard height, half length card:
167.64 mm length x 111.15 mm height

Weight 274 g
Camera interface 4 x CXP-12 (CXP-1 to CXP-12, micro-BNC/HD-BNC connector)
Ambient temperature 50°C
An adequate airflow in the PC is recommended.
Operating temperature 0°C to +50°C at 100 LFM*
Storage temperature -50°C up to +80°C
Relative humidity 5% - 90% non-condensing (operating), 0% - 95% (storage)
Environmental Conditions RoHS, WEEE, REACH compliant

Electrical Certifications


* LFM = Linear Feet per Minute, unit for measuring airflow velocity.

PCIe Bus Data Throughput


The PCIe bus data throughput depends on the motherboard, the chip set, and the BIOS configuration of the host PC. It can differ from slot to slot. It can also depend on the number of installed PCIe boards, e.g., a PCIe x8 connector may support only x4 performance.

Always check the mainboard manual thoroughly to be sure.